Tuesday, 23 December 2008

Hi all

It is time for the third posting in my series about using BizTalk to integrate to Excel spreadsheets. My first two postings are here (Installation) and here (The schema generation wizard).

This third posting is a talk about the runtime, and how it works.

The setup

To start out, I have done a simple test, and you can find my project


It has a simple spreadsheet and a schema for this spreadsheet (both are described in my previous post) and the setup basically just has a FILE Receive Location and a send port with a filter that takes everything from the Receive Port the Receive Location belongs to. My aim is to see how fast the Spread Disassembler is.

First, a short description of my setup:

My BizTalk installation is in a Microsoft Virtual PC 2007 virtual machine.

The host machine is a Hewlett Packard 8710w laptop with an Intel Core Duo T7700 2,4GHz CPU, 2GB of RAM and Windows XP Professional Service Pack 3 and completely updated as of 7'th December 2008.

The guest system is a virtual machine which has one 2,4GHz CPU, 1GB RAM and Microsoft Windows Server 2003 R2 Enterprise Edition SP2 - also completely updated as of 7'th December 2008.

The test

I created 999 copies of the same spreadsheet and moved them into a folder watched by the receive location. They were read, transformed into XML, and output into the output folder in 3:19 minutes. This is an average of 5 spreadsheets per second.

This took me by surprise - I had expected it to be faster. So I decided to do things more academic than looking at the time stamps of the output files. After all, there are PLENTY of functionality that could be the time consumer. So I created a BAM Activity and View, tracking when my Receive Port starts and when it ends.

A table showing the average processing time can be seen here:

Number of messages in test Average processing time per message Messages per minute
5 0,0227 seconds 2643
63 0,0337 seconds 1780
127 0,0584 seconds 1027
1966 0,2714 221

So it is pretty clear, that performance drops drastically when the load increases. I do not blame this on the Spread Disassembler, though. Since this is a virtual PC, with SQL Server on the same box as BizTalk, the mere I/O operations when writing all the output files to the hard drive conflicts with the I/O operations of BizTalk using the MessageBox. I find this a much more likely issue for the drop in performance than that the disassembler should get slower just because more messages come in.

So, to sum up, it seems that the Spread Disassembler can take a pretty heavy load - Up to 2643 messages per minute (44 messages per second). This is given less than ideal operating and hardware conditions, but optimal conditions with regards to the BizTalk Server not doing anything else at the time.

Maybe in a later post I will take a look at more complex spreadsheets/schemas and also test the performance of the assembler.


Tuesday, 23 December 2008 21:26:40 (Romance Standard Time, UTC+01:00)  #    Comments [0]  | 
All comments require the approval of the site owner before being displayed.
Please login with either your OpenID above, or your details below.
Home page

Comment (Some html is allowed: a@href@title, b, blockquote@cite, em, i, strike, strong, sub, sup, u) where the @ means "attribute." For example, you can use <a href="" title=""> or <blockquote cite="Scott">.  

Enter the code shown (prevents robots):

Live Comment Preview

Theme design by Jelle Druyts